Monday, 26 August 2013
I've continued with DCC and used NCE components from Coastal DCC. In this case the control box consists of the standard connector panel with an EB1 short circuit protection board and a mini panel.
I wanted to simplify the control of the points away from switches or buttons for each point and make use of what would traditionally be done by a diode matrix. In this case the mini panel takes up to 30 inputs and you program it to drive whatever accessories or macros you want. In this case it took me about 10 minutes to program the 7 switches.
I've still got a couple of points that are not switching the frogs reliably. I've not had this problem before but for some reason I'm not getting enough throw on the seep point motors to allow the sliding switch to make reliable contact. I've even had a point motor collapse on me, something that has never happened before.
It's quite expensive to have this electronics, probably £100 as opposed to £10 for a diode matrix but this is re-programmable and so mistakes are easily rectified.
All in all this probably took around 4 hours of the bank holiday weekend, not a bad few hours work. However, now it's back to work, plus a holiday, plus trying to move house means blog posts are likely to be even less frequent than ususal.
For reference, all the documents for the NCE components are available as pdfs on their website so I keep copies of them in Evernote on my Nexus tablet. It's a great way to carry all your documents with you when out and about.
Saturday, 10 August 2013
- removed all the scenery
- upgraded the legs to a quick release system I devised
- expanded the front of the layout to have a harbour
- laid nearly all he track
- wired up the track
- run a train
The next stage is to wire the points in so I can confirm that all the trackwork is properly live and there are no dodgy places that will let me down in 2 years time. This is where the time needs to be spent to create a quality foundation.
Saturday, 3 August 2013
- Shops across the middle
- Industry at the sides
- Land rising to each side so buildings have to rise with it
Saturday, 30 March 2013
It's day 1 of York show. I'm up here with Tony and Richard and we're operating Clydach. It was a trek getting here. Due to the knock on effects of several accidents our 3 hour journey yesterday became 5.5 hours.
Still, the layout went together quickly and is running well. As the picture shows, the public arr enjoying it and 3 or 4 deep is par for the course.
It's been a long time coming. Thoughts of how to create the backscene have been at the back of my mind since the start of the layout. I ...
Easter weekend is the perfect time to get some quality modelling time done. First you have to ensure all domestic duties are taken care of a...
Yesterday the decoder was fitted and it worked, for a whole 60 seconds! Typical progress it felt like. Today, under a magnifier I realised t...
Well it ran for a while, all of probably 10 minutes before the gremlins started appearing. On the right hand bend trains were slowing far mo...